Hipath 4000 LTU failure - VoIP / PBX Info Forum for Avaya / Nortel, Cisco, ShoreTel, Panasonic and other manufactuers Tech Tips Community

zerodock · April 28th, 2008

Does anyone know how to clear a LTU alarm from hista once it has cleared on its own? del-gra doesn't work and Siemens says it takes 18 hours which doesn't work. We have always had to switch processor sides to clear. munipulating vadsu doesn't work. I can't believe there is not a simple command to clear a LTU alarm. All the others can be cleared with the del-gra. All replies appreciated

Rajesharnair · April 29th, 2008

Hi Zerodock..

you can erase the complete errors on hista by using DEL-HISTA;

The again you have to add it by using

ADD-HISTA:2500; - if simplex H4K ver 1.0 system
or
ADD-HISTA:10000; - if duples H4K ver 1.0 or higher versions

all the best!

toppmoeller · April 30th, 2008

ltu failure is in amo vadsu , central alarm number 2.
if you've just tried to delete with del-gra:bp,2;
and it doesn't work you have to set threshold 1 at 65535 and treshold 2 at 65535 to disactivate the alarm

Mitch99 · May 1st, 2008

Or you could just hide it with AMO Signl
CHANGE-SIGNL:TYPE=MID,CD=F,NO=XXXX,OUT=LOCK;
XXXX=Alarm number

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hiPath 4000 Programming	BigPhoneDaddy	Hicom/HiPath	13	November 16th, 2009 10:12 PM
Hipath-4000	rajithsekhar	Hicom/HiPath	1	April 21st, 2008 06:14 AM
Reports in Hipath 4000	Krishna	Siemens	0	June 29th, 2007 05:42 AM
Comparison of MD 110 and Hipath 4000	bhavik	Technology	3	October 27th, 2006 03:35 PM
IPDA for the HiPath 4000	icetea	Hicom/HiPath	0	May 13th, 2005 01:41 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)