Hipath 4000 LTU failure - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

zerodock · 04-28-2008, 01:15 PM

Does anyone know how to clear a LTU alarm from hista once it has cleared on its own? del-gra doesn't work and Siemens says it takes 18 hours which doesn't work. We have always had to switch processor sides to clear. munipulating vadsu doesn't work. I can't believe there is not a simple command to clear a LTU alarm. All the others can be cleared with the del-gra. All replies appreciated

Rajesharnair · 04-29-2008, 01:34 AM

Hi Zerodock..

you can erase the complete errors on hista by using DEL-HISTA;

The again you have to add it by using

ADD-HISTA:2500; - if simplex H4K ver 1.0 system
or
ADD-HISTA:10000; - if duples H4K ver 1.0 or higher versions

all the best!

toppmoeller · 04-30-2008, 03:10 AM

ltu failure is in amo vadsu , central alarm number 2.
if you've just tried to delete with del-gra:bp,2;
and it doesn't work you have to set threshold 1 at 65535 and treshold 2 at 65535 to disactivate the alarm

Mitch99 · 05-01-2008, 05:54 AM

Or you could just hide it with AMO Signl
CHANGE-SIGNL:TYPE=MID,CD=F,NO=XXXX,OUT=LOCK;
XXXX=Alarm number

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hipath-4000	rajithsekhar	Hicom/HiPath	1	04-21-2008 05:14 AM
hiPath 4000 Programming	BigPhoneDaddy	Hicom/HiPath	11	01-09-2008 02:28 PM
Reports in Hipath 4000	Krishna	Siemens / Rolm	0	06-29-2007 04:42 AM
Comparison of MD 110 and Hipath 4000	bhavik	Technology Chat	3	10-27-2006 02:35 PM
IPDA for the HiPath 4000	icetea	Hicom/HiPath	0	05-13-2005 12:41 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)