Hi Com 150e - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

chubby99 · 03-15-2008, 08:38 AM

How do I add ip access to the HiCom 150e system. At the moment I'm
using Manager E.

cheers

OBT · 03-15-2008, 09:10 AM

Is this for programming?, If so you would need a lim card, and I am not sure if it was available on the Hicom 150e. Is that the office pro ( looks like the 3700 or does it look like the 100 or 3350)

Even so you would still program the system with the manager E

chubby99 · 03-15-2008, 03:08 PM

Hi
Not to sure of the model it has a double floor standing case and there are two ports on the back to access the system. I needed to know if I coulg access the system through a network by adding some sort of network card.

cheers

nijhu178 · 03-21-2008, 08:31 AM

your system is a Hicom office Pro of an Hipath 37x0 depending on hardware type. what kind of flashcard is used on the mainboard.

On the 8 or 10 MB flashcards your only option is to use an xpress@lan module.

when a mmc card is used you have 2 lan interfaces to use.

a Lim module, only for csta and management use
or HXGM module for all ip features like ip trunks or phones

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hicom 150e PSU	chubby99	Hicom/HiPath	1	03-13-2008 10:23 PM
HiPath 150e OfficePoint, get connected?	Stebo86	Hicom/HiPath	3	03-04-2008 06:07 PM
Help with Hicom 150E OfficePro!!!	krypton1234	Siemens / Rolm	1	02-27-2008 03:40 AM
150E OfficeCom Problem	jessiejames	Hicom/HiPath	2	07-09-2007 02:25 AM
Hipath 150e Serial Commands	CanStringCan	Hicom/HiPath	5	10-15-2004 04:08 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)