HiPath 150e OfficePoint, get connected? - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

Stebo86 · 03-03-2008, 06:43 AM

First of all, I'm a complete noob with this system. But let's get straight to the point.

How could I programm the Telephone Central; I don't see a com-port on the device. So i think it's best with the internal modem of my laptop?
But how should I Connect?

I've searched for several solutions however, I couldn't find one.

nijhu178 · 03-04-2008, 05:37 AM

you can connect to an office point using it's serial port, if present. or by using the build in ISDN modem.

before connecting you need the programming software called Manager E.

you also need to know the username and password of the system. Or restore default setting using the bleu switch on the mainboard.

In default settings the pbx will be in german language. you need a system phone connected to the 1st or 2nd port on the mainboard to set the system to the language you want.

you also must define your trunks before you can dialin to the system.

All programming can also be done on a system phone. using *95 to get access.

good luck.

Stebo86 · 03-04-2008, 08:27 AM

Thanks.. will try tomorrow

Today i'm not at work.

nijhu178 · 03-04-2008, 06:07 PM

je hebt wel 't zelfde vlaggetje, bellen of mailen is sneller

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with Hicom 150E OfficePro!!!	krypton1234	Siemens / Rolm	1	02-27-2008 03:40 AM
Hicom OfficePoint C / Hipath 3550/3350	skiguy09	Siemens / Rolm	1	12-17-2007 05:50 PM
150E OfficeCom Problem	jessiejames	Hicom/HiPath	2	07-09-2007 02:25 AM
call forwarding problem using H150E OfficePoint icw Siemens Gigaset4000	jangor	Hicom/HiPath	1	03-08-2007 08:44 AM
Hipath 150e Serial Commands	CanStringCan	Hicom/HiPath	5	10-15-2004 04:08 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)