Setting the Date and Time in a Hicom 300 H - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

sherlockphones · 11-24-2006, 08:41 PM

Can anyone tell me how to change the date/time in a Hicom 300H? It won't let me post a link, but I did find another thread here (pbxinfo.com/forums/archive/index.php/t-4195.html) which gave the command below for a 300E.

CHA-DATE: <yyyy>,<mm>,<dd>,<hh>,<mm>,<s s>; where

yyyy = Year ranging from 1989 to 2078
mm = Month ranging from 1 to 12
dd = Day ranging from 1 to 31
hh = Hour ranging from 0 to 23
mm = Minutes ranging from 0 to 59
ss = Seconds ranging from 0 to 59

Unfortunately it didn't work for me in my 300H. When I use that command I get an error stating "VERB DOES NOT EXIST OR YOU ARE NOT AUTHORIZED TO USE IT WITH THAT NOUN!"

I don't know if the problem is the command or my login. Any ideas? I know very little about Siemens, but setting the time ought to be a pretty simple thing. Thanks.

~Rod

train · 11-26-2006, 08:43 AM

try this:

Example

Setting the date to 18 October 1985 and the time of day to 11:15:00.
Input:

CHANGE-DATE:1985,10,18,11,15,00,EAST,60,NT;

sherlockphones · 11-27-2006, 01:31 PM

Thanks for the reply, train. Unfortunately I got the same error as before (VERB DOES NOT EXIST OR YOU ARE NOT AUTHORIZED TO USE IT WITH THAT NOUN!). If that command works for you, then I'm thinking it must be an issue with my login.

***Dtu*** · 11-27-2006, 06:39 PM

Try as train said but leave out the east and 60 and NT.

This description is valid for SP300-V3.4 (And works for me)

Example
Setting the date to 18 October 1985 and the time of day to 11:15:00.
Input:
CHANGE-DATE:1985,10,18,11,15,00;

sherlockphones · 11-28-2006, 12:38 PM

I still get the same error. I've put a call in to Siemens. Thanks for your help.

***Dtu*** · 11-28-2006, 09:14 PM

Some people use cha-date:
If try either change-date: or cha-date: then press enter it should guide you through.

change date: 'enter'
Year =
2006 'enter' (If you did not get to this point then I would say it is your access level that is stopping you from executing the command).
Let us know what Siemens tell you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Set Date and Time	jlivezey1999	Meridian Systems	2	08-31-2006 01:08 PM
Change intreval to date time	John_In_Dakota	Contact Center Symposium and ACD	2	07-20-2006 04:13 PM
Resetting your ESI phone system’s clock	rixride	ESI	0	03-24-2006 11:22 AM
siemons setting time and date	Anonymous	Siemens / Rolm	3	01-28-2004 08:09 PM
Hicom 130 reset, call not forwarded	Anonymous	Siemens / Rolm	1	12-08-2003 06:39 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)