sepay

Hi GRJones,

You can do the following commands;

a.) On the command console (WinFiol/any terminal)
SUVIP:NUMTYP=EX;
Get an extension listed on this and write this down.

b.) Then, use that extesion to change the extension number of the digital phone. ex. 2222 - digital extesion, 2223 - found free extension on the printout of the SUVIP command.
KSDNCIROLD=2222,DIR=2223;

c.) Then use this command to change the analog extesion; ex. 2224 - analog extension.
EXDNCIROLD=2224,DIR=2222;

d.) Then change the extension number of the digital;
KSDNCIROLD=2223,DIR=2224;

For the call forwarding, check this command on each local;
CDINIIR=xxxx,DIV=yyyy;
where;
xxxx = local
yyyy = diversion address

Let me know if you have further concerns.

Thanks!

Regards,

Sepay