| |||||||||
![]() | | ||||||||
| |||||||||||||||
| |||||||||||||||
![]() |
| | LinkBack | Thread Tools | Display Modes |
| | #1 (permalink) | ||||||||
| Junior Member ![]() ILE has no status.
Rep Power: 0 ![]() | Ccis I have a customer with a maxed out PRO II (88sets+VM). They are expanding and do not care enough about features to upgrade to the latest-n-greatest. Also, they have delayed on upgrading for a few years because replacing all of their phones is not budget friendly (30k). I know that NEC does not support this, but ETW phones work just fine on the IPK, I have tried this. My options are: 1) PRO II to IPK over CCIS 2) IPK to IPK over ccis using EXPT 3) IPKII CCIS does not support most voicemail features on the remote cabinet; they know this, but do not care. Centralized billing does not work with CCIS without a 2400/2000; they are not using this right now, but I'm thinking ahead for Call Analyst. With option 1, will CCIS work between dissimilar systems? I could then use one or the other cabinet as the master. I would be losing slots to a DTI and CCH, but their cost would be small. Remember, their only concern right now is adding phones. With option 2, I have no worries except that I would have to get a rack with RAK units and move the system to a larger room. Also the equipment cost is 25k. With option 3, - I am not a dealer for this system, but I am certified on IPK and Aspire - which means I rape the internet for parts and pay for high dollar support if needed. The local dealer is really going down the tubes with extremely poor service and experience. I also am not sure if ETWs will work. I really dig this system and would rather do this. With option 1 & 2, I will be swapping out phones slowly. Important positions would have the newer phones, of course. The local Aspire dealer is on the ball, and I sometimes send business his way. I think it's the best route, only problem is his outrageous cost. So, for a customer that is not concerned with features, is not worried about one day having to replace it, and simply wants to add more offices, I feel like option 1 is both economical and modest. I just need to know if CCIS will work. Any thoughts on this will be greatly appreciated, also if you know another option I haven't thought of, like IAD. Its too bad that the PKU only goes to 120. | ||||||||
| | |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| IPK ccis, no msg lamp on one ext | Doghart | Electra Elite | 3 | 08-08-2007 09:30 PM |
| ccis with 2 ivs's | cayres | NEAX 2000 IVS(2)/ IPS | 6 | 07-11-2007 11:18 AM |
| CCIS connection between HDS and IPS | AbuSuhail | NEC | 2 | 05-04-2007 03:40 AM |
| 2000ips ccis cid issue | wilabkr3i_zrhedd | NEAX 2000 IVS(2)/ IPS | 1 | 02-01-2007 01:20 PM |
| 2400 ccis and virtual lens 013xxx | ron4ron | NEC | 4 | 01-27-2004 05:36 PM |