| Been working on one a bit over a year now. For the most part the map interface, table entry and servord is the same as an SL100. We are running in a TDM hybrid config. There are alot of new components, CMT, SDM, the cores are now SAM21 shelves. To access maintenance for the cores you have to telnet directly into them, no access from the MAP. In addition there is a GUI interface for card maintenance of the SAM21. The SAM21 consists of Call Agent cards, Shelf Controller cards, Message Controller cards (connect via fiber to the MS) and Gateway controller cards.
For IP lines, or native lines hanging off of an MG9000 they must be first configured with an application called OSSGATE which resides on the CMT server. This requires single line entry - no prompting like in servord.
OTM as it stands today is pretty lame. Supposedly a new web based tool will be available for managing XPEC loads and M39xx firmware.
PM me with contact info if you want to discuss. | 
07-27-2005, 04:13 PM 
Linear Mode
