Home         |        Forums         |        Portals          |           Login               |     Register              
 
Go Back   VoIP / PBX Info Forum for Avaya / Nortel, Cisco, ShoreTel, Panasonic and other manufactuers Tech Tips Community > PBX / IP PBX FORUMS > AVAYA > Definity, S87xx, CM
Reload this Page ISDN PRI of G3si avaya connecting ISDN PRI2 of nortel
   SEARCH  
     
User Name Password      
Save ?
Definity, S87xx, CM Definity Servers Support

Tags: , , , , , ,

Avaya Call Accounting, Hotel Billing, Telephone Reporting, Avaya Compliant Solutions

Reply
 
LinkBack Thread Tools Display Modes
Old March 9th, 2005   #1 (permalink)
Jedly@
Guest

Activity Longevity
0/20 0/20
Today Posts
0/0 sssssssss
Partner ACS 5.0 and PC VM Card - delayed voice mail problem
Hi Guys,

Need your help guys, im on connecting this two pbx's have already establish the connection.
But only the nortel can call the avaya system but the avaya can't call the nortel system.
Can someone give me sample config connecting this two systems?
Is this possible using ISDN PRI not using the QSIG, as i now qsig is much easier but have a high cost involved...

thanks guys appreciate your bug help..

je..
  Reply With Quote
Old March 9th, 2005   #2 (permalink)
Junior Member

Activity Longevity
0/20 15/20
Today Posts
0/0 ssssssss1
Location: Bangalore
Rep Power: 0binoy is on a distinguished road
Country:
Send a message via Yahoo to binoy
ISDN PRI of G3si avaya connecting ISDN PRI2 of nortel
Hi,
From your attachment i dont see the trunk group selected in your signalling group.Can you assign the trunk group and then try.
Cheeers
Binoy
binoy is offline   sendpm.gif Reply With Quote
Old March 9th, 2005   #3 (permalink)
Jedly@
Guest

Activity Longevity
0/20 0/20
Today Posts
0/0 sssssssss
Is there a better way to access our Voice Mail?
Already try assign trunk and put that signalling but still one way connection is only establish. Meaning nortel system can only call the avaya but the avaya can't call the nortel system.

thanks...
  Reply With Quote
Old March 9th, 2005   #4 (permalink)
Jedly@
Guest

Activity Longevity
0/20 0/20
Today Posts
0/0 sssssssss
This is the trace call i have captured.

07:28:12 dial 306
07:28:12 term trunk-group 73 cid 0xa
07:28:14 dial 30601
07:28:14 seize trunk-group 73 member 1 cid 0xa
07:28:14 idle trunk-group 73 member 1 cid 0xa
07:28:14 denial event 1164: ISDN call reject CV/CID D1=0x1 D2=0xa
07:28:16 idle station 4012 cid 0xa
07:28:16 TRACE COMPLETE trunk-group 73 cid 0xa
  Reply With Quote
Old April 7th, 2005   #5 (permalink)
Junior Member

Activity Longevity
0/20 15/20
Today Posts
0/0 sssssss14
Rep Power: 6jgabasa is on a distinguished road
Have you enable the send digits from AVAYA to nortel? The calls from avaya is being denied by Nortel. Try looking on the settings of Nortel PRI2 to allow sent digits.
jgabasa is offline   sendpm.gif Reply With Quote
Old April 11th, 2005   #6 (permalink)
Jedly@
Guest

Activity Longevity
0/20 0/20
Today Posts
0/0 sssssssss
CDR Account Codes
Hi jgabasa,

Where i will do that config?

thanks,
  Reply With Quote
Old October 10th, 2005   #7 (permalink)
Junior Member

Activity Longevity
0/20 12/20
Today Posts
0/0 ssssssss0
Rep Power: 0glynnmsg is on a distinguished road
Was anyone able to answer this . I have a nortel 81 c with a t-1 (NO PRI) connected to the S8700. They can call over to the 81 c , but I'm unable to call them. The problem is I get dail tone then a re order tone.

Mark
glynnmsg is offline   sendpm.gif Reply With Quote
Old October 19th, 2005   #8 (permalink)
Junior Member

Activity Longevity
0/20 15/20
Today Posts
0/0 sssssss14
Rep Power: 6jgabasa is on a distinguished road
its been quite awhile the last time i handle a nortel meridian, when you configure a PRI card on the nortel; look for the sent digit parameter.

You then need to access a new "load" to configure the length and digits you are to send and accept.

i do apologize if i cannot be of help in providing you the details.
jgabasa is offline   sendpm.gif Reply With Quote
Old October 24th, 2005   #9 (permalink)
Jedly@
Guest

Activity Longevity
0/20 0/20
Today Posts
0/0 sssssssss
Integrating an Octel 250 with a Avaya S8300
that's fine buddy..
  Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Connecting Nortel M1 Opc 11 and Avaya G3r without QSIG / 2Mb tenasa Meridian Systems 10 April 17th, 2009 07:41 AM
Avaya and Nortel PHONE_TECH Definity, S87xx, CM 5 July 21st, 2006 11:15 PM
From Nortel to Avaya, Yikes! TelecomDude Definity, S87xx, CM 3 October 24th, 2003 09:36 AM
From Nortel to Avaya TelecomDude Meridian Systems 1 October 23rd, 2003 06:53 PM
connecting ISDN trunks from an 81c to a DEX switch canoc Meridian Systems 1 December 27th, 2002 01:08 PM


All times are GMT -4. The time now is 10:22 AM.

Contact Us - PBX Info Forum | Telephony Resource Tech Tips Community for Avaya, Nortel, Cisco, Panasonic, ShoreTel, Asterisk and more... - Archive - Top

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright (c) www.pbxinfo.com - PBX Info | Free PBX, PABX, IP PBX, VOIP and Telephone Information Resource Forum - Avaya / Nortel, Cisco, Panasonic, Mitel, ShoreTel, more...