sillejo

VWIC2-1MFT-E1

(Voice WAN Interface Card version #2 - 1 MultiFlexTrunk - E1)

__________________
Deus ex machina

hmursal152

Sillejo,

Is there anything else I need for the CISCO2801 or this card is enouth for my purpose.
Some one told methat I need NM-1CE1T1-PRI and PVDM2-36DM - is he right or not?

mtashiro

You don't need the NM-1CET1-PRI but you do need then PVDM2

hmursal152

You mean that I need VWIC2-1MFT-E1 and PVDM2?

Now I have purchased VWIC-1MFT-E1 only, can I use it with or without PVDM2?

mtashiro

You will need the PVDM2. They are the DSP's that actually do the conversion. If you use the MFT card without the PVDM2 it will be data only.

sillejo

Without the PVDM2 it will not take the commands to set up the PRI-Group under the controller T1. It will tell you that the router does not have enough resources. The PRI channels are bound directly to the DSP's on the PVDM2

The 2801 may have shipped with a PVDM2 if you ordered the voice bundle. If you ordered a Security Bundle or Data Bundle then it does not come with PVDM's.

If you are using a router that was purchased on the internet (not from cisco or from a real distributor) then you will have no way of knowing how it was ordered. There is no physical or part number difference on the boxes themselves. The only difference is in the part number used to order the box.
*CISCO2801-SRST/K9 this is a voice bundle that comes with PVDM's
*CISCO2801-SEC/K9 this is a security bundle, no PVDM's included

Putting these two routers side by side, you will not know which is which. You would have to login to the CLI and do "show DSP sum" If it has DSP's then it has the PVDM

__________________
Deus ex machina

hmursal152

This is what I have after the "show DSP sum" command.

TelCom-Bosaso#show DSP sum
^
% Invalid input detected at '^' marker.


On the other hand "DSP" in not under "show" command. Pls see below.

TelCom-Bosaso#sh ?
aaa Show AAA values
access-expression List access expression
access-lists List access lists
accounting Accounting data for active sessions
adjacency Adjacent nodes
aliases Display alias commands
alignment Show alignment information
archive Archive of the running configuration information
arp ARP table
async Information on terminal lines used as router
interfaces
auto Show Automation Template
backhaul-session-manager Backhaul Session Manager information
backup Backup status
bridge Bridge Forwarding/Filtering Database [verbose]
buffers Buffer pool statistics
calendar Display the hardware calendar
call Show call
caller Display information about dialup connections
cca CCA information
cdapi CDAPI information
cdp CDP information
--More--   cef Cisco Express Forwarding
class-map Show QoS Class Map
clock Display the system clock
cls DLC user information
cns CNS agents
compress Show compression statistics
configuration Configuration details
connection Show Connection
context Show context information about recent crash(s)
controllers Interface controller status
cops COPS information
crm Carrier Resource Manager info
dampening Display dampening information
debugging State of each debugging option
derived-config Derived operating configuration
dhcp Dynamic Host Configuration Protocol status
diag Show diagnostic information for port
adapters/modules
dialer Dialer parameters and statistics
dnsix Shows Dnsix/DMDP information
dot1x IEEE 802.1X
dss DSS information
dtp DTP information
--More--  
entry Queued terminal entries
environment Environmental monitor statistics
errdisable Error disable
event-manager Event manager information
exception exception information
file Show filesystem information
flash: display information about flash: file system
flow-sampler Display the flow samplers configured
frame-relay Frame-Relay information
glbp GLBP information
hardware Hardware specific information
history Display the session command history
hosts IP domain-name, lookup style, nameservers, and host
table
html HTML helper commands
idb List of Interface Descriptor Blocks
interfaces Interface status and configuration
inventory Show the physical inventory
ip IP information
iua ISDN User Adaptation Layer information
key Key information
kron Kron Subsystem
l2tun Layer 2 tunnel information
--More--  
line TTY line information
llc2 IBM LLC2 circuit information
location Display the system location
logging Show the contents of logging buffers
login Display Secure Login Configurations and State
mac-address-table MAC forwarding table
management Display the management applications
memory Memory statistics
microcode show configured microcode for downloadable hardware
mmi mmi configuration
modemcap Show Modem Capabilities database
monitor Monitoring different system events
network-clocks Network clocks information
ntp Network time protocol
parser Display parser information
pas Port Adaptor Information
pci PCI Information
platform Show platform information
pm Show Port Manager commands
policy-manager Policy Manager
policy-map Show QoS Policy Map
ppp PPP parameters and statistics
pppatm PPP over ATM
--More--  

sillejo

Sorry, wrong command structure

"show voice dsp"
or
"show voice dsp crash-dump"

assuming this is IOS 12.4T or above

__________________
Deus ex machina

hmursal152

Sorry, the command didn't accept.

TelCom-Bosaso#show voice dsp
^
% Invalid input detected at '^' marker.

TelCom-Bosaso#show voice dsp crash-dump

% Invalid input detected at '^' marker


I have VWIC-1MFT-E1 istalled slot-2 - so I need E1 configuration to PSTN for internet dialup. Your help please.