External modem on BP50/250 (CPU-D4/5) - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

smurfer · 09-10-2008, 08:20 AM

It is possible to use external modem instead of internal one (built in) on CPU to remotely access BP for maintence? If it possible please explain how to do it.
I have TSR 902 0466 cable (for connecting modem on CPU-D_/AUX).

Thanks in Advance

Smurfer

johnny_jo_jinx · 09-17-2008, 01:18 AM

You will need to set one of the three com ports on the CPUD_ to
Device type 11
PABX Internal
1200 Baud (to be safe)
Auto select ticked
Route on request set to O&M with BMS/RASC
Dial attempts 0
Dialled number - blank
Modem init string - blank

Your TSR cable is intended to connect directly to a modem, so you should be able to do that, via a 9pin - 25pin serial adapter if needed.

John

smurfer · 09-18-2008, 03:45 AM

Thanks but this dont working.

johnny_jo_jinx · 09-18-2008, 08:15 AM

You will need to check with a PC connected directly to the same serial port on the CPUD_. If you use the modem cable you already have, you will need a null modem or crossover cable to connect to the PC serial port.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BP50 PBX Card	Matthias	BusinessPhone	3	07-08-2008 09:01 AM
Software to a BP50	PEOD	BusinessPhone	1	04-16-2008 01:13 AM
CS1000E Cannot receive external Fax and modem call.	Ric	Meridian Systems	9	02-10-2008 08:09 PM
RASC for BP50	dazred	BusinessPhone	1	07-06-2007 12:22 AM
ANI Configuration for BP50	bpoz	BusinessPhone	1	11-30-2006 07:08 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)