clwfoneman

If you will, take the Rad apart and you should find a memory device in there similar to a watch battery. Take it out, short the positive and negative with a paperclip or a piece of stripped wire for a second, then put the whole shooting match back together, when you power it up, the Rad should be factory default. Write back if this doesn't work.

Thanks

phonegurl

if you do not want to dismantle it there is a programming sequence you can do to reset it...PM me if you want those instructions...

skippy440

Yes you can short out the capacitor in the fastrad, but there is an easier way without taking the unit apart.

Use a M7310 with at least 2 intercoms buttons
F9**
hit left display key 5 times
hit center display key 7 times
hit right display key 8 times
press HOLD
press digit 2
press digit 1
press release/RAD now defaulted.