Home | Register |    
 
Forums         |        Articles          |      Software          |      Portals          |      Resource          |      Wiki      |    White Papers         
 
Go Back   PBX Info :: Your Free PBX, PABX and Telephone Information Resource > PBX SYSTEMS > NORTEL > BCM and Norstar
Reload this Page DOUBLE PRI
   SEARCH  
     
User Name Password      
Save ?
BCM and Norstar ICS, CICS, MICS, BCM, BCM 50 BCM 200 and BCM 400, Startalk Voicemail call pilot 150

Tags: ,


Post New Thread  Reply
 
LinkBack Thread Tools Display Modes
Old 03-18-2004, 09:42 AM   #1 (permalink)
phonegurl
Junior Member

Activity Longevity
0/20 16/20
Today Posts
0/0 ssssss349
Location: SC
Rep Power: 5phonegurl is on a distinguished road

Total Points:
Donate
Scenario: MICS w/ 6.1XC w/ (2) enabled PRI's
Question: If the primary PRI was to fail (from the TELCO end) would the secondary PRI automatically take over? In other words, the users currently dial "9" to get an outside line, but if the Primary PRI were to fail would they still be able to dial out this way? I've heard that this is true but I think that there is something in programming that needs to be "turned on" or set up to make this work. Can anyone offer any kind of input on this?
phonegurl is offline   sendpm.gif Reply With Quote
Old 03-18-2004, 04:37 PM   #2 (permalink)
Ramjet
Senior Member
 
Ramjet's Avatar

Activity Longevity
9/20 20/20
Today Posts
0/0 sssss1394
Rep Power: 7Ramjet is on a distinguished road

Total Points:
Donate
Gender:
Country:
Arkansas State

We have 2 pri's in our N* at the office, but have never disc one to see if the other takes over. Don't think so, cause in prog you set your b channel to ascending or descending. Try it and see!!!
Ramjet is offline   sendpm.gif Reply With Quote
Old 03-18-2004, 07:56 PM   #3 (permalink)
PP
Senior Member
 
PP's Avatar

Activity Longevity
14/20 20/20
Today Posts
0/0 sssss1626
Location: MIAMI, FLA
Rep Power: 7PP will become famous soon enough

Total Points:
Donate
AS LONG AS THE 2 T'S ARE IN THE SAME LINE POOL THE NORSTAR WILL DISABLE THE T AND ROUTE EVERYTHING OVER THE OTHER T
PP is online now   sendpm.gif Reply With Quote
Old 03-19-2004, 08:06 AM   #4 (permalink)
phonegurl
Junior Member

Activity Longevity
0/20 16/20
Today Posts
0/0 ssssss349
Location: SC
Rep Power: 5phonegurl is on a distinguished road

Total Points:
Donate
:wink: Thanks guys! If in the event this ever happens I'll post back and let you know if it works this way or not. I'll be sure to check the line pool access also. Have a great day!
phonegurl is offline   sendpm.gif Reply With Quote
Old 03-19-2004, 06:38 PM   #5 (permalink)
hotextec
Junior Member

Activity Longevity
0/20 20/20
Today Posts
0/0 sssssss67
Location: Austin, Texas
Rep Power: 6hotextec is on a distinguished road

Total Points:
Donate

Send a message via AIM to hotextec
You have also to tell the Telco that the 2nd PRI to set it up as extended from the first one. But I have a problem understanding how one can work without the other one that has the D channel. If the one with the D channel goes down...Your down. Right?
hotextec is offline   sendpm.gif Reply With Quote
Old 03-19-2004, 06:44 PM   #6 (permalink)
BigPhoneDaddy
Junior Member

Activity Longevity
0/20 15/20
Today Posts
0/0 ssssss218
Location: Chicago
Rep Power: 5BigPhoneDaddy is on a distinguished road

Total Points:
Donate
Gender:
Country:

Check to see if you have a D channel set on each T1. If not you might want have it changed on the PBX and corrdinate with telco.

If it is not set with a seperate D channel on each T, the controlling circuit will take both T1's down if it ever has issues.
BigPhoneDaddy is offline   sendpm.gif Reply With Quote
Old 03-19-2004, 07:19 PM   #7 (permalink)
hotextec
Junior Member

Activity Longevity
0/20 20/20
Today Posts
0/0 sssssss67
Location: Austin, Texas
Rep Power: 6hotextec is on a distinguished road

Total Points:
Donate

Send a message via AIM to hotextec
Ats wat Im talkin 'bout BF Daddy!
hotextec is offline   sendpm.gif Reply With Quote
Old 03-21-2004, 02:15 AM   #8 (permalink)
imported_hawaiitech
Guest

Activity Longevity
0/20 0/20
Today Posts
0/0 sssssssss

Total Points:
Donate
I've seen CO's provide PRI's with dedicated D-chnls for each T1, 2 PRI's with 1 D-chnl, or 2 PRI's with one Primary D-chnl and 1 Backup D-chnl. They all work fine PBX's, but I've never tried to program one on a Norstar. Has anyone done this befoe?
  Reply With Quote
Old 03-21-2004, 10:23 AM   #9 (permalink)
Brewsky
Junior Member

Activity Longevity
0/20 16/20
Today Posts
0/0 ssssss505
Rep Power: 5Brewsky is on a distinguished road

Total Points:
Donate
RE:
Ys, many times. They must be seperate D channels. You can program them as the same (ex: PRI-A) pool group.
Brewsky is offline   sendpm.gif Reply With Quote
Post New Thread  Reply

« Previous Thread | Next Thread »


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
The Office Christmas Party ConvergenceDiva Off Topic - Humor/Jokes 2 12-12-2003 06:06 PM
Great Website...... PD Off Topic - Humor/Jokes 1 09-03-2003 09:22 AM

Tags   |   Advertise    |    Media Partners   |    Admin   |   About us   |   Contact Us   |   RSS   


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.0.0
Copyright PBXINFO LLC 2006