NIC on NAM - PBX Info :: Your Free PBX, PABX and Telephone Information Resource

telvendor · 07-25-2006, 03:59 PM

still having problems trying to install a NIC in a NAM ver 4.04a. i can configure the NIC card and it looks like it takes but then when the system is reboot it hangs. it's acting like an IRQ conflict. does anyone know how to display existing IRQ assignments in OS2? there is no CMOS/BIOS display for IRQ's. not sure how to display and reassign IRQ's.

aikenmarvin · 07-26-2006, 05:01 PM

I'll go look at home and see if I still have those DOCS, let you know tom.

telvendor · 07-31-2006, 02:17 PM

Here's some more info for anyone who can help. (I have a 4.04a copper NAM). The monitor and keyboard package are up and working fine. There aren't any dip switches in my NAM. There are 8 card slots and the first slot is not a ful ISA slot. I have tried removing the IBM parallel port driver in MPTS but the NAM reboots itself continually w/o this driver until it is re-installed. I have a 3COM ISA 3C509B NIC card. When the NIC card is configured for IRQ 9 the NAM locks up. trying to access any feature code from the phone results in an "inactive feature" display. The mouse moves on the desktop of the NAM but won't open anything. When an RMVIEW is done to display resources on the NAM nothing is using IRQ 9 but IRQ 2 says "PCI pin = none flag = exclusive PIC_1". I know that in newer OS2 machines IRQ 2 and IRQ 9 are linked but I don't know if the use of IRQ 2 in this machine has anything to do with the problem

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adding More Ports to a NAM - Help Please	phoneauthority	BCM and Norstar	1	06-22-2006 01:54 PM
NAM 4.0 acd codes	jknight	BCM and Norstar	1	05-12-2006 02:01 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)