Ramjet

Shoot, I can't think of any way to do it. Maybe someone else has an idea.

__________________
Two snips, a snort, a turn, a fly, and a grunt, and it was so simple, like the jitterbug, it plum evaded me!

JJ

Setup night services to ring receptionest phone for those incoming lines and then program the other extension to ring on those lines when night is activated.

Assign button for night/normal service for Night Ringer:

Go into programming Feature
A. Configuration - Next
B. General Admin. - Show
1. Sys speed dial - Next until you see
7. Service Modes - Show
Control sets - Show
Show line - dial in your first line number
Line 01: 221 - means that 221 is the person who will turn night services on for this line. Press change and enter the extension number you want to control the services. Do this for all lines you want effected by pressing NEXT.

Press the Header button
Show line: _
Header
Control Sets - Next
Name1:Night - Show
Setting: Manual - Next
Trunk answer: Y - Next
Extra -0 set: 221 - Next
Show line: - Dial in your first line number
Ringing Sets - meaning the extension you want to ring when this service is activated.
SHOW
Set: 221 - Press remove to remove the extension from the group. Again, the extention that you want to ring should be assigned here!
NEXT
Aux.Ringer N
NEXT
Show line: _ - Enter the next line... 02... continue to program each line you want effected.

Now go up to the control set and with the handset down in the cradle press Feature * #, then press the button you want to be the Night Service button, then dial Feature 871. This is now your on/off button for night services.

Good Luck!!