Danbhalah

This should you get you up and running on a very basic level, I am more of a Siemens man, so I hope this helps but did a little Alcatel installs.


ALCATEL SYSTEM SETUP (pre-installation)
Step 1: Make sure that all cards are present and accepted; this is in Hardware & Limits, sub menu Main Cabinet, then check Software Key Features to see what you are enabled for.

Step 2: Plug Advanced telephone into slot 1/1 check to see if working, then work your way down to initialize ports. (If possible use correct telephones).

Step 3: Adding lines by default if ISDN, first go to External Lines, sub menu List of Trunk Groups, on Index 1 (access 9) & add further lines if required, go to Link-Cat & set Normal + Restricted from 16 to 1.

Step 4: List of Accesses - Trunk Groups check that your line access is present.

Step 5: Traffic Sharing & Barring - Check that your Barring Tables are set for you to dial out, by default it is set to 2 (0 + 141), local calls only, 7 bypasses all barring. For External Diversion go to Joining & tick boxes 1 + 4.

Step 6: System Misc. - Feature Design - Part 2 tick box for Transfer EXT/EXT & Part 3 change Conference to Unrestricted.

Step 7: Change Password to ********, for future access

Step 8: First analogue port when system comes out of box is set for FAX, change it by going to Subscribers then d/c the extension, go to Services – Service 1 should be changed to Telephone. Mailboxes on analogue ports must be deleted to get dial tone for int/ext.

Step 9: Subscribers – Extension – Details – Features – Part 1 tick External Diversion, Part 2 tick 3 boxes for Join Incoming & Outgoing etc.



Regards

DanB

Danbhalah

PROGRAMMING CENTRAL SPEED DIALLING NUMBERS

Press i
Config
System
Operator
Enter Password
ComSpd (first speed dial number shown)
Goto
Enter speed dial numbers required ie Speed Dial No. 7000 = 0001
7001 = 0002
7002 = 0003
7320 = 0320

Scroll Right
TrGp nbr (prefixed by 82 or 83 for each Dept)
Number over writting if required
Apply Twice
Accepted should flash
Scroll Right to Name
Name
Enter Name
Apply
Next to continue
or Return Twice
then Exit

Dtu

@wajee - Wouldn't the company you joined have all of the material available to you????? Especially if they are a premium partner?

wajeee

first of all i am very very much thankfull to Mr. danbhalah for his guidence i hope i will get his help in future too.
well my compny is premium partner of alcatel but as i am newly apointed therefore i dont have the access to technical support site. and to get access to that site i have to do a lot of hard work and with you people helpning me i think i will make it.

i have a question now

i have OXE installed at a client. thay have operator console 4035, i configured attendent group then attendent set, then key features then prefix plan and then assistant attendent .
i have 4 analoge trunks terminated in oxe and thay all are in 4 different trunk groups .
where to configure so that all trunks may land to attendent set ?
secondly
what if i want to give one trunk out of 4 to attendent and remainig to direct numbers

kindly tell me how does this work in both oxo and oxe

i will be waiting for your repy
thanks and regards

wajeee

hi i am from pakistan and i have a very unique issue if any one of you guys can guide me i will be very much thankfull

welll i have to configure voice mails in OXO with lotus domino i mean voice mails stored on oxo system can be coppied to lotus domino server.
waiting for any help thanks

antoni

As premium partner you can access the businesspartner website www . businesspartner.alcatel . com ask to your manager for a valid user/password and technical profile access, then you can access to the Alcatel knowledge Base.

Kumite

oxo
external lines -> List of accesses -> Details -> call-dist an there you gine the Subscribers Number