| I see a couple things that don't look right in the data you included but I don't know what you are trying to do yet so I can't offer any corrections.
If all you are sending out to the Mux is four digits only, then your aar min/max should both be 4. You have it set to 5 min so the PBX is going to wait for one more digit.
Before I can say anything about the route pattern I need to have some idea of what you are trying to do.
I notice in the UDP you also show a minimum length of 5. What is the source of this extra digit? In both AAR and UDP you are telling the switch to wait for one more digit.
Lets see if your connectivity is ok.
Do a "test board <DS1 board> long". You can stop after test 146 completes because you don't care about the rest. Did everything pass?
Now do a "status sig <sig group>". Is it inservice?
If the connection to the Mux is ISDN, the trunk group type must be ISDN. __________________
Do not meddle in the affairs of dragons for you are crunchy and taste good with ketchup.
Marty |