mrmike

X11 Features and Services
Directed Call Pickup (DCP) allows a caller from one Call Pickup group to
pick up a ringing call in another Call Pickup group. The ringing call is picked
up by dialing either its Call Pickup Group number or the DN on which it is
ringing.

Directed Call Pickup adds two new methods of Call Pickup to the existing
Call Pickup feature:
• Group Pickup (GPU), and
• DN Pickup (DPU).

Group Pickup lets you pick up any ringing call in your own pickup group, or
any pickup group in the system.


DN Pickup allows pickup of a call ringing on a specified DN. If a DN is not
assigned to any group, it defaults to Group Zero (0). This prevents any other
group from picking up that DN.

Both GPU and DPU can be activated using programmable keys or Special
Prefix (SPRE) code dialing. Each pickup method can be assigned to a
telephone independent of the others.

The dialed digits (DN or group number) are displayed on the Digit Display as
dialed. Like the Call Pickup feature, the lamp is optional for the Call Pickup
and Group Call Pickup keys. No second dial tone is given after the key is
pressed, nor is it given after the SPRE code is dialed.



Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 15 – Define the number of digits dialed for Call Pickup groups.
2 LD 10 – Configure analog (500/2500 type) telephones to allow DCP
Class of Service.
3 LD 11 – Configure Meridian 1 proprietary telephones to allow Directed
Call Pickup Class of Service.

LD 15 – Define the number of digits dialed for Call Pickup groups.

LD 10 – Configure analog (500/2500 type) telephones to allow DCP Class of Service.
Prompt Response Description

REQ: CHG Change existing data.
TYPE: FTR Gate opener.
CUST xx Customer number.
- OPT (COX) COP CO no priority or call priority for Call Pickup and Group Call
Pickup.
- PKND (1)-4 Number of digits dialed for Group Pickup. Prompted only if
DCP is equipped.

Prompt Response Description
REQ: CHG Change existing data.
TYPE: 500 Telephone type.
TN l s c u
c u
Terminal Number.
For Option 11C.


LD 11 – Configure Meridian 1 proprietary telephones to allow Directed Call Pickup Class of
Service.
RNPG 0-4095 Call Pickup Group.
0 = no pickup group.
CLS (GPUD) GPUA
(DPUD) DPUA
(Deny) allow Group Pickup.
(Deny) allow DN Pickup.


Prompt Response Description
REQ: CHG Change existing data.
TYPE: xxxx Telephone type, where:
xxxx = SL1, 2006, 2008, 2009, 2016, 2018, 2112, 2216,
2317, 2616, or 3000.
TN l s c u
c u
Terminal Number.
For Option 11C.
RNPG 0-4095 Call Pickup Group.
0 = no pickup group.
CLS (GPUD) GPUA
(DPUD) DPUA
(Deny) allow Group Pickup.
(Deny) allow DN Pickup.
KEY xx GPU

xx DPU
Group Pickup key (not available on M3000).

DN Pickup key (not available on M3000).

Feature operation


To answer a call in another Call Pickup group from a Meridian 1 proprietary
telephone, follow these steps:
1 Lift the handset.
2 Press GRP Pickup or dial SPRE + 94 or PUGR FFC.
3 Dial the pickup group number.

To answer a call on a specified DN from a Meridian 1 proprietary telephone:

1 Lift the handset.
2 Press DN Pickup or dial SPRE + 95 or PUDN FFC.
3 Dial the extension number.

To answer a call in another Call Pickup group from an analog (500/2500 type)
telephone, follow these steps:

1 Lift the handset and dial SPRE + 94 or PUGR FFC.
2 Dial the pickup group number.

To answer a call on a specified DN from an analog (500/2500 type)
telephone:
1 Lift the handset and dial SPRE + 95 or PUDN FFC.
2 Dial the extension number.