| E600 de 990 de will show the destination if it is forward all, note if this is external it will just show the line access code followed by a dash eg. in America this would be 9- ( here in OZ it is 0-) and you have to press de again to see the number. to delete it you enter CCC exe or you can just overwrite it using 9,XXXXXXX exe note the comma seperator between the access code and the number. if you just want it to go to an extension number simply enter the number exe. One thing I should stress is you need to be at the stage where the dash is showing on the current line to enter new info so if you pressed de to see the number you should press de again to get back to the dash.
Now if it is a call forward no answer or busy you will need to check commands E601 and E602 or just E603. There are others but they are seldom used.
The thing is this isn't a "night call forward" it is a permenant call forward on 990. The reason it only works at night is the digit translation is split into a day, night, mode a & mode b setting and we checked what 888 was translated to at night. if you check 7601 for 888 it will probably say 888 because that is the day destination.
Glad to have been of help. |