PBX Info :: Your Free PBX, PABX and Telephone Information Resource - View Single Post - Elite 48 installation
View Single Post
Old 04-30-2006, 08:41 AM   #2 (permalink)
Doghart
Moderator
 
Doghart's Avatar
Doghart has no status.

Activity Longevity
1/20 11/20
Today Posts
0/0 ssssss164
Rep Power: 4Doghart is on a distinguished road
The Elite 48 is the most basic of the the elite systems.

There are two slots on the lower right side of the cabinet where 2 25pair amphenol tails plug in and should route to a punch down block.

The tail on the top will have the 8 digital phone ports that run off the motherboard, then any ports supplied by co or station cards in the slots 3 and 4 (slot 2 is not used). The second amp tail will have any ports from cards plugged into slots 5-7.

if you go to any phone and press FEATURE then 4 it will tell you the phone's ext number and what port it is on.

D
Doghart is offline   sendpm.gif Reply With Quote