| This posed quite a bit of difficulty. Here is what finally allowed connectivity and external calls to complete. This BVoIP pilot is sitting behind our 81C. The 81C is providing the T1 connectivity to the Call Manager. (We were looking at QSIG but, our switch does not have that package installed.) Anyone have any other notes to add to this scheme?
DB15 RJ45
1 = 5
3 = 2
9 = 4
11 = 1
The cable connecting the connector above to the 6608 card needed to have the following:
End 1 = 1 2 3 4 5 6 7 8
End 2 = 4 5 3 1 2 6 7 8
The DCH needed to be:
USR PRI
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC D100
SIDE USR (could not set this to NET so it defaulted to USR)
the rest default out
The Route needed to be:
TKTP TIE
RCLS EXT
DTRK YES
DGTP PRI
ISDN YES
MODE PRA
IFC D100
SBN NO
PNI 00000
NCNA YES
NCRD NO
DSEL VCE
PTRP PRI
ICOG IAO
SRCH RRB
TRMB YES
default all the way out
Then the trunk members were:
TYPE TIE
CDEN SD
TRK PRI
PDCA 1
PCML MU
NCOS 3
CLS just enter DTN
default out
Rachelle |