PBX Info :: Your Free PBX, PABX and Telephone Information Resource - View Single Post - Connecting to BCM via Onboard ethernet port
Thread: Connecting to BCM via Onboard ethernet port
View Single Post
Old 12-22-2004, 11:01 PM   #3 (permalink)
jdavid99
Junior Member

Activity Longevity
0/20 13/20
Today Posts
0/0 ssssssss2
Rep Power: 0jdavid99 is on a distinguished road
ATA lockup on MICS 6.1
You have to make sure your laptop is on the same subnet as the BCM. If your laptop is set to DHCP and you connect directly to the BCM via crossover cable it won't work. Change your network cards TCPIP properties to a static IP address that is on the same subnet as the BCM. By the same subnet I mean if the BCM is 10.10.10.1 then set your laptop to 10.10.10.2
jdavid99 is offline   sendpm.gif Reply With Quote