begemot

Task summary list
The following is a summary of the tasks in this section:
1 LD 16 – Define the RANF route.
2 LD 16 – Define the RAN1 route.
3 LD 16 – Define the RAN2 route.
4 LD 14 – Define the trunk for RANF.
5 LD 14 – Define the trunk for RAN1.
6 LD 14 – Define the trunk for RAN2.
7 LD 15 – Enable Automatic Wake Up in Customer Data Block.
8 LD 10 – Set language and CCOS for analog (500/2500 type) telephones
(on a per TN basis).
9 LD 11 – Set language and CCOS for Meridian 1 proprietary telephones
(on a per TN basis).
10 LD 12 – Allow access to AWU from Attendant Consoles.

LD 16 – Define the RANF route.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE RDB Route Data Block.
CUST xx Customer number.
ROUT 0-511
0-127
Route number.
For Option 11C.
TKTP AWR AWU RAN route.
RTYP AUD Audichron recorder.
- GRD PLAY IDLE Ground Start Arrangement where:
PLAY = RAN machine sends a ground signal when playing.
IDLE = RAN machine sends a ground signal when idle.
If the United Kingdom (UK) package 190 is equipped the
default response is PLAY, if this package is not equipped
the default response is IDLE.
ACOD xxxx Trunk route access code. Must be different from RANF
ACOD.

LD 16 – Define the RAN1 route.
LD 16 – Define the RAN2 route.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE RDB Route Data Block.
CUST xx Customer number.
ROUT 0-511
0-127
Route number. Must be different from RANF route number.
For Option 11C.
TKTP AWR AWU RAN route.
RTYP AUD Audichron recorder.
- GRD PLAY IDLE Ground Start Arrangement where:
PLAY = RAN machine sends a ground signal when playing.
IDLE = RAN machine sends a ground signal when idle.
If the United Kingdom (UK) package 190 is equipped the
default response is PLAY, if this package is not equipped
the default response is IDLE.
ACOD xxxx Trunk route access code. Must be different from RANF and
RAN1 ACODs.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE RDB Route Data Block.
CUST xx Customer number.
ROUT 0-511
0-127
Route number. Must be different from RANF and RAN1.
For Option 11C.
Automatic Wake Up Page 535 of 3156
Features and Services
LD 14 – Define the trunk for RANF.
TKTP AWR AWU RAN route.
RTYP AUD Audichron recorder.
- GRD PLAY IDLE Ground Start Arrangement where:
PLAY = RAN machine sends a ground signal when playing.
IDLE = RAN machine sends a ground signal when idle.
If the United Kingdom (UK) package 190 is equipped the
default response is PLAY, if this package is not equipped
the default response is IDLE.
ACOD xxxx Trunk route access code.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE AWR AWU RAN trunk.
TN l s c u
c u
Terminal Number.
For Option 11C.
CUST xx Customer number.
RTMB xx yy Route number and member number.

LD 14 – Define the trunk for RAN1.
LD 14 – Define the trunk for RAN2.
LD 15 – Enable Automatic Wake Up in Customer Data Block.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE AWR AWU RAN trunk.
TN l s c u Terminal Number. Must be a different TN from RANF.
CUST xx Customer number.
RTMB xx yy Route number and member number. Must be a different
RTMB from RANF.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE AWR AWU RAN trunk.
TN l s c u
c u
Terminal Number. Must be a different TN from RANF and
RAN1.
CUST xx Customer number.
RTMB xx yy Route number and member number. Must be a different
RTMB from RANF and RAN1.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: AWU Automatic Wake Up options.
CUST xx Customer number.
Automatic Wake Up Page 537 of 3156
Features and Services
- AWU YES Activate AWU for a customer.
- ATRC (NO) YES (Deny) allow attendant recall.
CONF 0-159 Conference loop number.
- RANF 0-511 Music RAN route number.
- RAN1 0-511 Primary AWR route number.
- RAN2 0-511 <CR> Secondary AWR route number.
- LA11 X 0-511 Language 1, RAN route 1.
X = remove language RAN route definition.
- LA12 0-511 Language 1, AWR route 2.
- LA21 0-511 Language 2, AWR route 1.
- LA22 0-511 Language 2, AWR route 2.
- LA31 0-511 Language 3, AWR route 1.
- LA32 0-511 Language 3, AWR route 2.
- LA41 0-511 Language 4, AWR route 1.
- LA42 0-511 Language 4, AWR route 2.
- LA51 0-511 Language 5, AWR route 1.
- LA52 0-511 Language 5, AWR route 2.
- R2BN hhmm RAN2 start time.
- R2ED hhmm RAN2 end time.
- NRWU 2-(5) Number of rings for a wake up call
- TAWU 1-(3) Number of wake up tries for an unanswered AWU call
Note 1: AWR route number ranges from 0-511 apply to RT, NT, 51, 61, 71, and 81 only. Range is 0-127 for
all other options. Enter “X” to remove a route.

LD 10 – Set language and CCOS for analog (500/2500 type) telephones (on a per TN basis).
LD 11 – Set language and CCOS for Meridian 1 proprietary telephones (on a per TN basis).
Prompt Response Description
REQ: CHG Change existing data.
TYPE: 500 2500 Telephone type.
TN l s c u
c u
Terminal Number.
For Option 11C.
LANG (0)-5 Language number.
To remove entry, precede with X.
CLS CCSA Controlled Class of Service allowed.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: xxxx Telephone type, where:
xxxx = SL1, 2006, 2008, 2009, 2016, 2018, 2112, 2216,
2317, 2616, or 3000.
TN l s c u
c u
Terminal Number.
For Option 11C.
CLS CCSA Allow Controlled Class of Service.
LANG (0)-5 Language number.
To remove entry, precede with X.
KEY xx WUK Assign a wake up key on a telephone.
Must be a key/lamp pair.
Note: To assign a language on a per DN basis, use a Background Terminal.

LD 12 – Allow access to AWU from Attendant Consoles.
Prompt Response Description
REQ CHG Change existing data.
TYPE aaa Console type, where:
aaa = 1250, 2250.
TN l s c u
c u
Terminal Number.
For Option 11C.
KEY xx AWU Add an AWU key.