Well I found something in French----Kind of hard to figure out what they were saying....
. The reason 9 isn't used is it is the Access Code for programming the system.
The system is setup as a 2 line system, where line 1 is defaulted as incoming/outgoing and line 2 is dedicated as incoming.
Enter into programming (dial access code) I think the default is 9123.
Dial 1 for CO 1
Dial 0 to access the 'Dial Public Network'
Dial 1 to set the 'Voice Frequency'
So the programming would look something like this:
9xxx210011 followed of * to validate. (This will route to the PSTN)..
This is the page I found (Translated).......
Quote:
To visualize the installation on the case
The case of the system has 9 indicators making it possible to visualize the state of the lines, the stations and the functions Aiguilleur of Telefax/Répondeur.
Indicator of station State
Extinct Free
Lit Occupied
Flickering Called
Indicator of line State
Extinct Free
Lit Occupied
Slow indicator Called
Glare Pointsman of Telefax or activated Responder
Indicator of the function Responder (with chart option Vocal Reception) State
Extinct Free
Lit Message deposited
Slow indicator Occupied
Flickering fast Piles of safeguard except service or saturated memory
Pointsman of Telefax
This function is reserved for item 41.
The Aiguilleur function of Telefax makes it possible automatically to direct the calls according to their source, either towards a telecopier or towards a telephone.
Thanks to this function, it becomes useless to especially hold a line for the telecopier.
To activatethe Pointsman of Telefax
To take down item 41.
To compose the access code 9xxx
To compose 11
To compose 1 to direct line 1, of 2 to direct line 2 or of 3 to direct the two lines.
To hang up again.
To stop ofthe Pointsman of Telefax
To take down one of the stations of the installation
To compose the access code 9xxx
To compose the 10
To hang up again.
Behavior of an external call in arrival
Ifthe Pointsman of Telefax is activated, at the time of the arrival of an external call, the system takes down automatically after 2, 3, 4 or 5 ringings and analyzes the origin of the call during 5 seconds.
If the system detects the whistle characteristic of the telecopier, it directs the call towards the telecopier connected on the number of station chosen before.
If the system does not detect this characteristic whistle, it directs the call towards the stations which can receive a call arriving on this line.
Notes:
Any moment, it is possible to intercept the call or the communication.
After the taken down automatic one, it is possible to join a station by surnumerotation.
The number of ringing before taken down automatic and the choice of the number of station receiving the telefaxes are given at the time of the programming of the system by Minitel or item 41.
If the system is equipped with the chart Vocal Accueil option, at the time of taken down automatic and during the analysis of the origin of the call, the correspondent receives the contents of the Vocal greeting message "TO HAVE PATIENCE" or an advertisement which you will have recorded.
If the system is not equipped with the chart Vocal Accueil option, at the time of taken down automatic and during the analysis of the origin of the call, the correspondent receives 5 seconds a beep followed of silence before being directed towards a station.
Personalization starting from item 41
Personalization makes it possible to adapt the system to the needs for the users and the site. Personalization can be carried out only starting from one station with classification voice frequencies connected on the position item 41.
To reach personalization
To take down item 41.
To compose the access code 9xxx
In order to protect personalization, the access code can. With the startup, the code factory is 9123.
Note:
If the system is equipped with the chart Vocal Accueil option, a vocal guide assists the user during personalization.
Table of the general menu of personalization
To compose the access code 9xxx followed:
Code Function
1 Startup and personalization ofthe Pointsman of Telefax. Personalization of the option Vocal Reception
2 Personalization of the lines network
3 Modification of the access code
4 Personalization of the stations
6 Modification of the temporization of overflow
7 Recording of the collective shortened numbers (directory)
8 Recording of the prefixes "Interurban" and "International"
9 Selection of the music of waiting
To personalizethe Pointsman of Telefax
To compose the access code 9xxx
To compose the number of heading 1 follow-up of:
Code Function Code Function Code Function
O Stop pointsman
1 Activation of the pointsman 1 Line 1
2 Line 2
3 Line 1 + Line 2
2 Orientation of the calls coming from a telecopier 1 Line 1 41 to 46 towards number of station
2 Line 2
3 Line 1 + Line 2
3 A number of ringings before taken down automatic 1 2 ringings
2 3 ringings
3 4 ringings
4 5 ringings
To compose * to validate
One hung up again before the end of a sequence cancels the programming in progress.
# makes it possible to erase a figure or a parameter typed by error and to modify it
* allows to leave the personalization ofthe Pointsman of Telefax and to return to the general menu
Example
To direct line 2 towards item 43 where a telecopier is connected, the sequence of figures is 9xxx12243
Why?
9xxx1 to enter in personalization ofthe Pointsman of Telefax
follow-up of 2 for the choice of the function "Orientation of the calls coming from a telecopier"
follow-up of 2 to select it the choice line 2
followed from 43 to indicate the number of the station which will receive the calls directed bythe Pointsman of Telefax
To personalize the lines network
To compose the access code 9xxx
To compose the number of heading 2 follow-up of:
Code Function
1 Line 1
2 Line 2
Then to compose:
Code Function Code Function Code Function Code Function
1 + xx Prefixes of exit if behind PABX O Mixed O Decimal 1 With automatic answer
0 Directly on the public network 1 Arrival 1 Voice frequencies 0 Without automatic answer
To compose * to validate
One hung up again before a validation by * cancels the programming in progress.
# to erase a figure or a parameter typed by error and to modify it.
* to leave the personalization ofthe Pointsman of Telefax and to return to the general menu.
Notes:
The prefix of exit if behind another system entered on 2 digits or 1 figure and #.
The personalization of the lines causes a restoring of personalization of attributions of lines at the stations.
With the startup, line 1 is declared in "Mixed" while line 2 is declared in "Arrival". When the system is equipped with two lines, it is advisable to declare line 2 in "Mixed" in order to indifferently taking one of the two lines at the time of the composition of the 0 (catch of starting line).
Example
To program line 1 with the following parameters:
Connected directly to the public network
Mixed line (départ/arrivée)
Classification at voice frequencies
With automatic response on behalf of the system
The sequence of figures is 9xxx210011 followed of * to validate.
To change the access code
In order to protect personalization from the system, the access code can.
To compose the access code 9xxx
To compose the number of heading 3 follow-up of: Code Function Code Function
xxxx New code * Validation
With the next attempt at entry in personalization, only this new code could be used.
To personalize the stations
To compose the access code 9xxx
To compose the number of heading 4 follow-up of: Code Function Code Function Code Function
1 to 6 Number of station 1 Limitation of the external calls 0 Very authorized
1 All prohibits
2 Directory alone
3 10 prohibited numbers and 10 authorized numbers (seeprogramming)
2 Membership of the group of stations 0 No group
1 Group 1
2 Group 2
3 KLMN Attribution of starting line and arrival K = 0 (yes), or 1 (not) line 1 departure
L = 0 (yes), or 1 (not) line 1 arrival
M = 0 (yes), or 1 (not) line 2 departure
N = 0 (yes), or 1 (not) line 2 arrival
4 Automatic call with taken down towards 0 Catch of a line
41 to 46 Post intern
400 to 402 Group stations
xxxxxxxxxxxxxxxx (16 digits maximum) number exteior
Prohibited numbers and of the authorized numbers
To record the prohibited numbers and of the authorized numbers:
To compose the access code 9xxx
To compose the number of heading 4
To compose the number of station from 1 to 6
To compose the 1 follow-up of: Code Function Code Function Code Function
3 10 prohibited numbers xxxx ABPQ # End of the number and passage to the following number
* End of the prohibited numbers and passage to the authorized numbers
10 authorized numbers xxxx ABPQ # End of the number and passage to the following number
* End of the prohibited numbers and left the interdits/autorized numbers
One hung up again before a validation by * cancels the programming in progress.
Note:
If your system is installed behind another PABX, this operational discrimination N that after the composition of the prefix of exit of this one.
Modification of attributions of lines entraine the cancellation of protections of station in progress.
Modification of the groups of stations entraine the cancellation of the references of station in progress.
Temporization of overflow
The temporization of overflow determines a time with the end of which a call without answer is transferred on item 41 as well as the stations from the group to which belongs the sounding station.
With the startup, the temporization of overflow is 20 seconds.
To modify the temporization of overflow:
To compose the access code 9xxx
To compose the number of heading 6
To compose temporization in seconds of 20 to 40
Collective shortened numbers: directory
The system places at your disposal a directory of 50 collective shortened numbers.
Access to the recording of the directory:
To compose the access code 9xxx followed:
Code Function Code Function Code Function
700 à 749 Shortened number used to call the correspondent xxxxxxxxxxxxxxxx, 16 digits maximum, # = pause of 2 S Number external of the correspondent * Validation of the number and exit of the annaire
To erase a shortened number entered by error
To compose the access code 9xxx
To compose the number abbrégé of 700 à 749
To compose # *.
Prefixes
This personalization makes it possible to record the prefixes used at the time of the trunk calls or international.
To record the prefixes:
To compose the access code 9xxx
To compose the number of heading 8 follow-up of:
Code Function Code Function Code Function
1 Interurban N° XXX Interurban prefix, # = pause of 2 S * Validation and left
2 International N° XXX International prefix, # = pause of 2 S * Validation and left
With the startup, the prefixes are the 16 for the interurban one and 19 for the international one.
A Européenne classification is currently studied by the authorities Européennes, the prefixes could be changed at the time of setting into service of this new classification during 1995.
Musical waiting
This personalization makes it possible to select the type of music of waiting and its melody.
Access to the personalization of musical waiting:
To compose the access code 9xxx
To compose the number of heading 9 follow-up of:
Code Function Code Function Code Function
1 Beeps
2 Internal music 1 to 5 selection of a music * Validation
3 External music
Cedric Moreau (ce.moreau@wanadoo.fr) right reserved © 1994-2004.
Page generated in the language "Fr" 09/06/2004 to 22:37:29. Valid page XHTML 1 Strict and CSS 2. |
Chas2002