If you don't have a MOL account to get the docs, then here is a link for docs:
Genesis Technical Support OK, I think I understand your routing setup, perhaps not the logic behind it (not really my business), but have just a few more questions:
Which SX-200 is this, a ICP, EL, ML, or Digital?
You said there is no toll restriction in the system, are all phones assigned a COR value of 1 then?
Is each Sat or Cell phone line connected to a single LS trunk port, if not how are they connected to the Mitel?
This is a VERY unusual configuration, is this a ship/mobile/seabound communications system, or stationary land based system?
Do you have the lines connected to the system and are you able to get calls IN to the system already?
Forgive my ignorance on the SAT lines, but what is the EXACT dial sequence for a call if you made it from a butt-set or single line phone, just one example for me to get the sequence down is fine. (ie. to call 612-222-1234 I dial 69716122221234# in Iridum and 16122221234# on Inmarsat B)
I can probably walk you through this step by step, but would still recommend you get a certified tech onsite one time to set this up for you. A good tech should be able to program and test this configuration in an hour or two at most. There are at least a dozen Mitel dealers in the Seattle/Tacoma metro area and a Mitel corporate office as well, a single site visit could save lots of headaches, but I can help if you are determined to do this on your own.