| Lets do it together.
Assuming The PBX is powered ON
Grab the cable TTY 0 (or it may say PORT 0 (25 Pin connector))
Connect your Nortel NULL modem to that cable. (25 PIN connector)
Now connect a cable to the other end of the NULL modem and then connect the other end to your computers Com 1. (generally a 9 pin connector)
Once all of that is connected.
Switch your PC on.
Log in to windows.
Open Hypterminal.
It will ask for a new Connection Name.
Type in PBX
Click OK
A new window will appear.
At the bottom of this window, it says "Connect using"
Click on the drop down box and select COM 1
All other boxes on this window should now be greyed out.
Click OK
A New window will appear.
At the top it says "BITS PER SECOND" select 9600
The next drop down box is labeled "DATA BITS"
select 8 from the drop down box
The next drop down box is labeled "PARITY"
select NONE from the drop down box
The next drop down box is labeled "STOP BITS"
select 1 from the drop down box
The next drop down box is labeled "FLOW CONTROL"
select HARDWARE from the drop down box
Click OK
Hit enter.
Do you get TEXT back? if not double check your cables. |