| That card should work just fine and the wiring is specific to slot/cabinet and breaks out on the TDM blocks, crone/66/110/bix/etc...whatever your environment is.
(info - the funny square connector with all the pins is a proprietary serial connector used for firmware updates)
Sounds like you have the hardware part.
However, R4+Z is right, the programming, dip switches, sense wheel etc. is another matter altogether.
You could be looking at a small project depending on the number plan, features needed, i.e. networked VM, message waiting lamps, dialing restrictions, LCR etc.
I also highly suggest a qualified NEC IPS technician for the job.
Good luck.
-Phil
tell-a-tek-dot-com =)
Last edited by pingram; October 1st, 2008 at 02:49 AM. Reason: added info note |