| You will need to set one of the three com ports on the CPUD_ to
Device type 11
PABX Internal
1200 Baud (to be safe)
Auto select ticked
Route on request set to O&M with BMS/RASC
Dial attempts 0
Dialled number - blank
Modem init string - blank
Your TSR cable is intended to connect directly to a modem, so you should be able to do that, via a 9pin - 25pin serial adapter if needed.
John
Last edited by johnny_jo_jinx; 09-17-2008 at 01:21 AM. |