| Callpilot 100/150 can be installed on ics 4.1 and up.
DTC cards can be programed for T1 trunks or for PRI.
If you wish to upgrade the 5.0 you have to go to 6.0
first and then to 6.1 or higher and you need an upgrade
kit from nortel or all programming will be lost.
And you need the PRI enabler key codes.
If you upgrade to ics 7.1 software you will need to go
with a Callpilot with 3.0 software.
Just went through most of this on a recent job. |