esfbene

DASS II - Call Charge Information Provided: No
Extended Digit Length: Yes
MCD - Report Transfers: All
Network Format: Yes
Report Account Codes: Yes
Report Incoming Calls: Yes
Report Internal Calls: Yes
Report Meter Pulses: No
Report Outgoing Calls: Yes
SMDR Meter Unit Per Station: Yes
SMDR Record Transfer: Yes
System Identification: 111
Time Change Reporting: Yes
Twenty-four Hour Time Reporting: Yes
ANI/DNIS/ISDN/CLASS Number Delivery Reporting: Yes
SMDR Real Time Reporting: No
OLI Node ID Format for Incoming Trunk Calls: Yes
Extended Time To Answer: Yes
SMDR File Transfer: No
Standardized Network OLI: Yes
Standardized Call ID Format: Yes
Suite Services Reporting: No
Report Internal Unanswered Calls: Yes
SMDR Extended Reporting Level 1: Yes
Report Attendant Name: Yes
Account Code Reporting for Internal Calls: No
Tag Call Reporting: No
Tag Call Identifier:
Path Reporting for Internal ACD2 Calls: Yes
Number of destination address digits to mask: 0
SMDR Extended Reporting Level 2: No
Two B-Channel Transfer Reporting: No

Here are my settings...typically I look at SMDR through PrairieFyre, but it also works through hyperterm to the port. In addition to these settings in the App Logic Port Assignment Form check to make sure the SMDR Logs Port Use is set to continuous.