I am under the impression that smdr output can be radically different from setup to the next.
Here is an example of our output from our HiPath4000 (we upgraded from a Hicom 300 - output was the same).
This is the raw format:
Code:
:STNO: 6549 :UNIT: 0 :CHRG:00000.00 :DUR: 0. 0.40 :RD:213 :TYPE: INCOMING :SERV: NORMAL :TG/NO:6099 :ST/M/D/H/M/S: 4. 3. 0.58.17 :NODECODE: 30 :DESTNO: 6549 :PIN: :COPIN: 0 :
:STNO: 6959 :UNIT: 0 :CHRG:00000.00 :DUR: 0. 0. 8 :RD: 8 :TYPE: OUTGOING :SERV: NORMAL :TG/NO:6038 :ST/M/D/H/M/S: 4. 3. 0.59.37 :NODECODE: 30 :DESTNO: 1800551702 :PIN: :COPIN: 0
:
What are you trying to achieve? Can you just use a one of the many call accounting software packages?