| If you are on site,
Direct connecting the PC serial port cable to the Hicom: Use straight-through EIA-232-E cable with optional 9-to-25 pin adapter.
a) Connect the maintenance terminal to the RMX port as follows:
1. Locate the RMX port and connect the maintenance terminal as follows:
Models 30 and 80—port 1 of the first LBU
Model 30E—port 1 of the DM80E
Models 30EX, 80EP, and 80EX—port 1 of the DM3L
Model 30EP—port 1 of the DSC
2. Configure the maintenance terminal to TVI 910 terminal emulation and the following communication parameters:
Field Value
Speed 4800
Bits 7
Parity Even
Stop Bits 1
b) After the ############################# banner appears, press Ctrl+T and wait for the < AMO prompt before continuing.
Last edited by rolm : 03-31-2008 at 01:23 PM. |