PBX Info :: Your Free PBX, PABX and Telephone Information Resource - View Single Post - Music On Hold Commands
View Single Post
Old 03-01-2008, 06:49 PM   #2 (permalink)
mrbsi
Junior Member

Activity Longevity
0/20 6/20
Today Posts
0/0 sssssss21
Location: Texas
Rep Power: 0mrbsi is an unknown quantity at this point
Gender:
Country:
Actually there are over ten options for the internal "canned" music on hold in the 2000 IPS. Only if you have a really old CPU, would you still only have the Madden's prayer and Fur else.

The command is 48

Y = 0 is where you enable it per type of call, and Y = 3 is where the other choices are.

In Y = 0 the setting data is 1400 for the jack you are referring to.

480>00>1400, = CO line type trunk
480>01>1400, = Tie line type trunk
480>02>1400, = Station calls

Make sure your input is 600 ohms, and there is a "pot" on the CPU that you can adjust the input volume, however I normally just adjust the input from the device.

How this helps,

Rick P
mrbsi is offline   sendpm.gif Reply With Quote