| Automatic Set Relocation is initiated as follows -
l Lift the handset.
2 Enter the relocation code, either SPRE 81 or the Flexible Feature code.
3 Enter the security code, if required. The default is 0000.
4 Enter the four-digit code to identify your telephone. A tone confirms the telephone is ready to be moved.
5 Unplug the telephone and install it at the new location.
6 Wait 30 seconds after installing then lift the handset and dial the four digit identifier. A tone confirms the telephone has been moved.
Modular Telephone Relocation is slightly different to the above -
1 Lift the handset or activate handsfree.
2 Enter the relocation code, either SPRE 81 or the Flexible Feature Code.
3 Enter the security code, if required.
4 A two-second tone burst confirms that the telephone is relocated out.
5 Unplug the telephone and install it at the new location.
6 The confirmation buzz through the telephone's loudspeaker indicates the telephone is in service.
NOTE All calls associated with the telephone receive force disconnect whilst it is relocated out. The telephone information automatically moves to the relocation table.
welcome back..
Colin |