Quote:
Originally Posted by Telco_nec  Commands in case you donr have matworx 1- 15131>15>0 (in case you stations are in another service class rather than 15 change the 1st data) 2- 1202>station number>1515
3- 200>choose access code for Authorization>A086
4- 200>choose access code for swaping>A196 In case you dont have Auth codes u can skip step 3 (I think so) To move Station-A to Station-B:
1. Station-A lifts handset. Receive Dial Tone.
2. Dial Authorization Code access code. Receive Special Dial Tone.
3. Dial Authorization Code for changing station class temporarily. Receive Dial Tone.
4. Dial Set Relocation access code. Receive Special Dial Tone.
5. Dial Station-B number. Receive Service Set Tone and LCD displays “SWAP OK xxxx” (where xxxx is Station-B number) 6. Restore the handset; After four seconds, data between Station-A and Station-B will be exchanged. Ramsey |
Before you do it ,you must check that ,is the two station in group service!
if so,you need to delete them from group service.