mrbsi

Ikenen,

Use your list out as a reference, and just change the order of the routes.

RA 0 is the first choice and RA 7 would be the last.

Also keep in mind the E or end setting is very important.

E = 1 for all Route advances (RA) that are NOT the last one, and E = 0 for the last RA.

Remember to keep all other setting the same per route. Meaning if the RA with route 1 has skip = 1 and PNL = 127, make sure to assign that in the new assignment.

You will be only changing the order of routes in the RA.

So when you have a hard copy of your OPR list out in hand, just delete RA 0 and re assign it with the adjustments. Keep going until you have completed. After you are completed do a list out again, and verify. Also make sure the end or E step is correct. The highest RA should be 0 (E = 0), and all lower steps should be 1 (E = 1).

Hope this helps,