Hi Sepay,
I did what you suggested and we have lift-off, well sort of
I am now able to fire up the RASC and the window remains open whereas previously it would flash up for a moment, carry out some checks and then close, so getting somewhere.
Next step was to create an account and to access the pbx which is via an external modem connected to an internal extension. The problem here is that the program refuses to recognise the modem, constantly reporting 'The system cannot open COM2 port requested by the application'.
I have tried changing com ports both physically and within the program, but it will not acknowledge the com2 port.
But, using a 'dialler' program installed on the pc, I am able to 'talk' to and dial numbers through the modem.
Any advice greatly appreciated,
Rgds,
webdepbx