Here's my problem,
I have a stand alone IPS 2000 with approx 50 IP sets. The customers network is on Vlan 1 and IPS is on VLAN 2. IP sets are set to boot into Vlan 2 on the and all works fine the site is live.
However, the other day I installed 4 x SP30 licenses onto the switch. When the customer runs the SP30 program they can log into the IPS (so the IS routing between Vlan1 & 2) The can make IP -IP calls ok (peer to peer) but as soon as the try to dial out or recieve a call from outside the call is established but there is not speach either way on the call????
If you run the SP 30 on a PC which is connected to a Vlan 2 hard coded port on the switch the SP30 works fine.
If you boot a physical IP phone in Vlan 1 and try to dial out you get the same fault as the SP 30's?
Its obviousley a problem in the network but what??????
