| Try this feature
Voice Call
Voice Call allows you to talk through the speaker of a Meridian digital
telephone from another Meridian digital telephone. The called party does not
have to lift the handset to hear you. For a two-way conversation, the called
party must lift the handset or activate Handsfree, unless Handsfree Voice Call
is enabled.
If the called telephone is busy on another DN, the caller hears continuous
ringing. The called party hears a single beep and the Voice Call DN key
flashes. If the telephone is busy on the Voice Call DN, the caller hears a busy
tone. A fast busy tone may indicate that the Voice Call DN is no longer
available (it may not be a Single Appearance DN).
Handsfree Voice Call
Handsfree Voice Call is an X11 Release 19 system feature that can be used
with such telephones as the M2112, M2317, and M2616.
Handsfree Voice Call provides the option of configuring VCC/DIG (with
voice option) to be answered in either Handsfree mode or loudspeaker only
mode. Calls answered in Handsfree (HVA) mode establish a two-way voice
path, while those answered in loudspeaker only (HVD) mode establish a
one-way voice path from the calling telephone to the destination telephone.
Introduced in X11 Release: All
North America
Page 1896 of 1918 Voice Call
553-3001-305 Standard 15.00 June 1999
Operating parameters
Both telephones must be Meridian digital telephones.
The Voice Call DN must be single appearance.
Handsfree Voice Call allowed/denied is set at the system level and can only
be used with digital telephones that have Handsfree capabilities (such as the
M2112, M2317, M2616). It requires Handsfree Allowed/HFA Class of
Service on the destination telephone, which is set at the telephone level. Basic
Rate Interface (BRI), M3000, and SL-1 telephones do not support the
Handsfree feature.
Feature interactions
Auto Answer Back (AAB)
This feature is not affected by the Handsfree Voice Call feature.
Flexible Voice/Data Terminal Number
If a dynamic TN has a single appearance DN key that terminates on a Voice
Call (VCC) key, the called party hears a single beep if occupied on another
DN. However, if the called party is a dynamic TN in data mode, the DN key
lamp flashes. A beep is not provided.
Manual Signaling
The same DN can be used for both Voice Call and Manual Signaling (Buzz)
as long as it remains a Single Appearance DN.
Multiple Appearance DNs
If a Voice Call DN is added to a second telephone, the DN becomes a
Multiple Appearance DN (MADN). Voice Call no longer works on that DN
and fast busy tone is returned.
Feature packaging
Voice Call requires the Optional Features (OPTF) package 1.
Handsfree Voice Call requires X11 Release 19 or later.
North America __________________  I'm a member of the "PbxInfo Gang" |