| Faxing over PRI with BCM
I'll try to help with what little I've "shoulder surfed" on several networked installations.
Set up the T1 between switches as a PRI
The CO Lines MUST be set as Loop Start Reliable Disconnect Enabled in order for the calls tr be transferred across the network
The Voice Mail Conversion Number is something that you just make up at the site without the voice mail. It doesn't matter what it is, as long as it does not conflict with any of the other parts of the dial plan. This Voice Mail Conversion Number is the ONLY member of the Voice Mail Calling Group. In the Non-Local UDP tables, you put this Voice Mail Conversion Number in as a Non-Local Extension, tell it to absorb all the digits, and then output the Voice Mail Calling Group number at the switch with the Voice Mail.
For the outgoing calls from the remote switch, be sure to have the ARS tables add a 9 to the number, so it will dial out from the other switch. Tell it to use the pool with the tie trunks. |