| If you are programming DSS keys on open buttons on your phone, the IPK2 system process is this:
1) Dial 751
2) push the button to be programmed
3) dial 01
4) dial the station number of the phone you wish to have a DSS button of
5) press hold ONCE
6) press the next button to be programmed or press speaker button to exit.
The reason the lights flash.... hmmm not sure. I think this is because the station you have programmed on DSS key is in CFI (Call Forward Immediate) or in DND mode.
Typically to clear a button I just dial 751, the button, 01 then speaker.
If the red light that is flashing you are talking about is the MSG light on the top right corner of the phone then do this:
At the top the phone, just under the display are the soft keys. Press the button marked 'EXIT' then the display will change, push the button under MW (message waiting), then press the button marked 'clear?' then the button marked 'all'. These buttons will appear in the softkey on the display of the phone after you press 'exit'.
To program a msg waiting button for a another ext on your phone dial 751, the button, 77, then the ext # of the mailbox you want it to light up for, then hold button.
Pressing this button when it is flashing will auto log you into that mailbox! No more # or *2#!!! YAY!
Was this helpful?
D
_________ |