| I agree with above posts...you reall need to attend some technical courses for BP programming. in meantime, if you using RASC to program BP, find FACILITY LIST option on screen (just under Operational data) or if you using BMS, once connected to the system, click on system name and find option "Programing assistant".
Select what you want to program and "wizard" will guide you thru commands which need to be changed to make that function to work.
Regarding connecting BTU-B with Cisco using S0,it's not simple...you have to uninstall existing BTU-B card, set the switches on card and install that card again. Only after that you can define S0 ports in system programming and connect to Cisco...without proper trainning you can only cause system damage.
Regards
Zoran |