vthaxton

I have an OLD IBM Rolm 9751 switch that recently had a Hard drive replaced and an old configuration restored.
Everything was working good this morning when suddenly all my DID lines are now none functional and a few Rolm phones do not work. They will ring and and lights flash but user is unable to answer them or receive dial tone.
The two LI errh beloww have been cleared and not returned.
DX_DLPSWD PRI-150 (Major) Cleared
CardID 0106 PRI-250 Cleared

This is current LI ERRH, LI ERRS, LI DOWN


% LI ERRH ;;;
TARGET SOURCE SYSTEM ID RELEASE BIND DATE CURRENT DATE/TIME
1 1 CORPS30527 9004.4.38 19/MAY/94 10/2/2006 13:44:10
---------------------------------------------------------------------- TELEPHONY PROBLEM OVERVIEW ----------------------------
LAST COMPLETELY CLEARED 12:03:01 10/02/2006
SMP CPU SHELF FAILED PRI = 082 (MAJOR) 1ST = 13:26 10/02 DTMF 01/010604 FAILED PRI = 254 1ST = 12:04 10/02 DTMF 01/010603 FAILED PRI = 254 1ST = 12:04 10/02 DTMF 01/010602 FAILED PRI = 254 1ST = 12:03 10/02 DTMF 01/010601 FAILED PRI = 254 1ST = 12:03 10/02 OPS 01/012409 FAILED PRI = 254 1ST = 12:03 10/02
% LI ERRS
ERROR RETURN TASK STATUS DATE TIME
AREA # ADDRESSES ENTRY FLAGS

DX 39 11A46D 40264 0 11A450 N/A 10/02 13:29:40
DX 39 11A46D 40264 0 11A450 N/A 10/02 13:05:20
DX 39 11A46D 40264 0 11A450 N/A 10/02 12:41:00
DX 39 11A46D 40264 0 11A450 N/A 10/02 12:16:40
DX 39 11A46D 40264 0 11A450 N/A 10/02 11:51:56
DX 39 11A46D 40264 0 11A450 N/A 10/02 11:27:36
DX 39 11A46D 40264 0 11A450 N/A 10/02 10:38:52
R/R A1 19804D 197104 19853A 1984E8 R/A 10/02 10:26:14
R/R 10 1970EE 19853A 40264 1984E8 R/A 10/02 10:26:14
!INT 11 2D234 33A95 1B3 34828 N/A 10/02 10:26:12
DX 39 11A46D 40264 0 11A450 N/A 10/02 10:15:02
DX 39 11A46D 40264 0 11A450 N/A 10/02 09:50:42
DX 39 11A46D 40264 0 11A450 N/A 10/02 09:26:23
DX 39 11A46D 40264 0 11A450 N/A 10/02 09:02:02
DX 39 11A46D 40264 0 11A450 N/A 10/02 08:37:38

% LI DOWN
CARD COURTESY DOWNED
--NONE--

CARD PHYSICALLY DOWNED
SMP2


CHANNELS SOFT DOWNED
--NONE--