PBX Info :: Your Free PBX, PABX and Telephone Information Resource - View Single Post - Call forward to virtual extension
Thread: Call forward to virtual extension
View Single Post
Old 09-28-2006, 04:28 PM   #8 (permalink)
AbuSuhail
Moderator

Activity Longevity
1/20 13/20
Today Posts
0/0 ssssss207
Rep Power: 4AbuSuhail is on a distinguished road
Country:
If you refer to service conditions in the manual you will read:
"12. After a TRUNK TO TRUNK CONNECTION is established, both trunks are released when a disconnect signal is received by either trunk."
If disconnect signal is set in CM3504 , and the CO line provides release signal then the call will be disconnected immediately upon completion of the call.
In case the release signal is NOT provided and the called number answers then the time set in CM410>03 will be used to disconnect the call on completion of the call
In case the called number does NOT answer then the call will be locked and it will ONLY be released by other ways like: CM EB0>Dxxx >CCC
Last edited by AbuSuhail; 09-28-2006 at 04:39 PM.
AbuSuhail is offline   sendpm.gif Reply With Quote